| Topic | Summary |
| Using a two-post hoist |
The objective of this procedure is to show you how to lift a vehicle using a two-post hoist. The lifting capacity of the hoist you are using must be rated for a vehicle weight greater than that of the vehicle you are intending to lift. Check the hoist rating and compare it with the weight given in the vehicle service manual. |
| Using a four-post hoist |
Four-post hoists allow the vehicle to be positioned and lifted easily. They are often used to lift a vehicle for wheel alignment services and brake repairs. The objective of this procedure is to show you how to lift a vehicle using a four-post hoist. |
| Using an engine hoist |
Mobile floor cranes are capable of lifting very heavy objects, which make them suitable for lifting engines. The objective of this procedure is to show you how to use an engine hoist and choose the correct attachments to lift an engine. |
| Using a floor jack |
Hydraulic and pneumatic jacks are the most common. They can be mounted on slides or on a wheeled trolley. The size of jack you use will be determined by the weight of the vehicle you want to lift. The objective of this procedure is to show you how to lift and secure a vehicle with a floor jack and jack stands. |
| Setting up an oxyacetylene torch |
An oxyacetylene torch can produce a large amount of heat. Be aware that any objects you direct the flame towards will become hot. Always light the oxyacetylene torch with the striker. A cigarette lighter or match would put your hand too close to the igniting tip. The objective of this procedure is to show you how to set up an oxyacetylene torch for heating. |
| Using an oxyacetylene torch | The objective of this procedure is to show you how to use an oxyacetylene torch for heating. Wear a leather apron or similar protective clothing and welding gloves when using an oxyacetylene torch and always use proper welding goggles. |