| Topic | Summary |
| Checking & adjusting brake fluid |
The objective of this procedure is to show you how to check and adjust brake fluid level. Brake fluid will absorb moisture rapidly. Always replace the cover or lid as soon as possible. |
| Replacing brake fluid |
Most manufacturers recommend that brake fluid be changed at least every two years. The objective of this procedure is to show you how to test and replace brake fluid in accordance with manufacturer's recommendations. |
| Checking brake pads |
You should check the disc brakes and disc brake linings every 15,000 kilometers (10,000 miles). The objective of this procedure is to show you how to check brake pads and calipers as well as check and measure rotors. |
| Replacing brake pads |
The objective of this procedure is to show you how to replace brake pads and refit according to the manufacturer's recommended procedure. Remember to remove some of the brake fluid from the master cylinder before you raise the vehicle. |
| Removing & replacing a rotor |
Before working on a vehicle's brakes, attach a safety notice to the vehicle to prevent people attempting to operate the brakes. The objective of this procedure is to show you how to safely remove and reinstall a disc brake rotor. |
| Checking wheel cylinders |
Some vehicles still have drum brakes or a combination of discs and drums. Passenger cars with this combination will have the drum brakes on the rear. Brake linings should be checked approximately every 15,000 kilometers (10,000 miles). The objective of this procedure is to show you how to check wheel cylinders, drum brake linings and measure brake drums. |
| Replacing brake linings |
Linings are designed to withstand extreme heat generation during braking. The linings must be able to withstand these temperatures and still maintain their braking efficiency. The objective of this procedure is to show you how to remove and replace drum brake linings. |
| Adjusting a park brake cable | There are two main ways of adjusting park brakes on vehicles; one method is done from underneath the vehicle, and the other from inside. A vehicle will only be fitted with one method of adjustment.The objective of this procedure is to show you how to check and adjust park brake cable following the manufacturer's procedure. |